:: Wireless Alarm System HM2078 Features ::

Ideal for :


Terrace Link House

Small office or workshop

Other premises that required less than 10 protection points

Key features :

No extra wires needed. Secure your home, garage, office and any other objects with this   easy to install alarm system

Full system including Wireless PIR Motion Sensor, Wireless Door/Window Contact, Remote Control and Indoor Siren.


The system consists of a Control Panel that monitors the various entry points in the home. If an intruder is trying to break into the house through one of the protected entry points, the system will detect this and will trigger the siren.

. .

When the intruder triggers any one of the sensor/detector, either the Magnetic Door/Window Contact, Vibration Sensor or PIR Motion Sensor, both the Control Panel and Siren Unit will sound immediately and have a 110dB piercing siren that will deter the intruder from continuing with the break in.


When the transmitter sends a signal to the Control Panel about the intrusion, the system will then call the 6 pre-programmed phone numbers which can be the hand phone or office phone, to warn the owner of the intrusion.


Technical Specifications :

Wireless Security System

Operate by Remote Control
Long distance remote controlling via Mobile or Touch-Tone Phone to arm, partial arm, activate or deactivate siren from anywhere in the world.
Built-in programmable voice dialer - automatically dials up to 6 Telephone numbers for help or notification and plays a 10 seconds own recorded voice message when alarm is triggered.

Tamper proof, built-in phone line disconnect alarm for better protection against line cut.

24 hour Panic Button feature

All sensors/detectors can be pre set to by-pass status. Activate alarm while staying / sleeping at home

User programmable security codes

Radio Frequency channel 315Mhz/433Mhz

Up to 100 meters wireless working range (without obstacles or interference)

Remote Control for arm/disarm alarm system and with build-in Panic Button function

Wireless PIR Motion Sensor. Tracks motion up to 12 meters, 110 degrees

Wireless Magnetic Door/Window Contact - for doors and windows that open out.

Wireless Vibration Sensor with adjustable sensitivity– for metal grills and fixed glass windows.

Wireless Smoke & Gas Leakage Detector compatible.

Wireless 110dB Outdoor Strobe Light Siren with tamper switch (support by 433Mhz RF Transmitter & RF Receiver).

IDF – Invisible Digital Fence for perimeter protection (Detection range up to 40 meters).

Batteries included for all wireless sensors and remote controls.

Battery low indication on Control Panel and Wireless PIR Motion Sensor.

Expandable with sensors from Hanter alarm series, support up to 99 sensors/detectors.

Adopt Fixed Code technology when adding new sensor/detector.

More than 6000 fixed codes for trouble free operation.

Data or setting will retained when power failure.


Product sizes :

Control Panel (HxWxD in cm): (14.8*14.5*4.1)cm

Remote control (HxWxD in cm): (5*4*1)cm

Door/window Contact (HxWxD in cm): (7*3.5*1.5)cm

PIR Motion Sensor (HxWxD in cm): (10*5.3*4)cm

Gross weight: 1.1 kg (Basic Package)


Basic Package contents :

Control Panel/Main alarm unit

2 units of Remote Control with battery 27A 12V

1 unit of Wireless PIR Motion Sensor with battery 9V

1 unit of Wireless Magnetic Door/Window Contact with battery 23A 12V

1 unit of Indoor Siren

Warranty Card

Power adapter 9VAC/300mA

Telephone cable

User Manual


Optional accessories :

IDF – Invisible Digital Fence (6 Beams, Length 124 cm & range 40m)

Wireless Vibration Sensor

Wireless Smoke Detector

Wireless Gas Leakage Detector

Wireless Roller Shutter Detector

Wired Outdoor Strobe Light Siren

Wireless Outdoor Strobe Light Siren

GSM Dialer

Warning Board or Warning Sticker

Frequency Range Extender


Minimum System Requirements :

240VAC Power connection for main alarm unit.

Analogue phone connections.

>> Click For Print Version <<
Copyright (c) 2010 Hanter Marketing Sdn Bhd. All rights reserved. Powered & Design By ZROBOT